« previous next »
Pages: [1]   Go Down

Author Topic: Need advice on my light  (Read 2993 times)

Offline Seeking_Coyotes

  • PPHA Members
  • PPHA Forum GURU
  • *****
  • Posts: 725
Need advice on my light
« on: November 22, 2012, 09:33:45 AM »
I have the xlr kill light 250 riding on top of my scope with the new plastic mounts that are removable.  I am not at all satisfied with the way the light appears in the scope.  Out to 40 yards it is perfect.  Beyond that it gets way under the crosshairs.  Had a yote last night at about 150 yards and couldn't see the eyes in the scope because my light was so far below the critter in the scope.  Never had the issue on my old scope with the same light and the metal mount.  Advice on how to fix this issue?
Logged

Offline scottm2012

  • PPHA Members
  • Junior Forum Member
  • **
  • Posts: 174
Re: Need advice on my light
« Reply #1 on: November 22, 2012, 05:10:31 PM »
Have you tried mounting it 90 degrees out from the top of your scope at the 3 or 9 o'clock position?

Also, what about turning the light within the mount.  It seems the bell may be reflecting the light at a downward angle.  Turning the light or bell may adjust the beam to meet your scope line of sight.
« Last Edit: November 22, 2012, 05:12:57 PM by scottm2012 »
Logged
Scott Morgan
District 3
TC Venture 308, Savage 340C 222, Dan Thompson and Bees O'Brien Calls 

"I am not your subject. I am the man who keeps you free. I am not your servant. I am the person whom you serve. I am not your peasant. I am the flesh and blood of America."

Joshua Boston

Offline Seeking_Coyotes

  • PPHA Members
  • PPHA Forum GURU
  • *****
  • Posts: 725
Re: Need advice on my light
« Reply #2 on: November 22, 2012, 05:16:33 PM »
No.  Is that a solution?  Are you doing it that way?  Wish it could swivel up and down.
Logged

Offline scottm2012

  • PPHA Members
  • Junior Forum Member
  • **
  • Posts: 174
Re: Need advice on my light
« Reply #3 on: November 23, 2012, 08:07:34 AM »
I'm not familiar with your type of light, though I am with the mount (I believe I'm thinking of the one your using).  It couldn't hurt to try.  If it don't work, try shimming the light.
Logged
Scott Morgan
District 3
TC Venture 308, Savage 340C 222, Dan Thompson and Bees O'Brien Calls 

"I am not your subject. I am the man who keeps you free. I am not your servant. I am the person whom you serve. I am not your peasant. I am the flesh and blood of America."

Joshua Boston

Offline bigben

  • PPHA Members
  • PPHA Forum GURU
  • *****
  • Posts: 3,535
Re: Need advice on my light
« Reply #4 on: November 23, 2012, 08:27:53 AM »
Make sure you have both halfs even when you tighten the knob.
Logged
“If you want to know all about a man, go camping with him. Probably you think you know him already, but if you have never camped on the trail with him, you do not”. Eldred Nathaniel Woodcock. “Fifty Years a Hunter and Trapper.”

Offline Seeking_Coyotes

  • PPHA Members
  • PPHA Forum GURU
  • *****
  • Posts: 725
Re: Need advice on my light
« Reply #5 on: November 23, 2012, 10:45:33 AM »
Thanks guys...I appreciate your tips.
Logged

Offline Seeking_Coyotes

  • PPHA Members
  • PPHA Forum GURU
  • *****
  • Posts: 725
Re: Need advice on my light
« Reply #6 on: November 24, 2012, 12:35:29 PM »
Ok, so I bought the Carnivore light from Ernie and it arrived yesterday.  Took it out for a trial run and it solved my problem.  I've used a bunch of different lights and I have to say this one is hands down my favorite shooting light.  I felt confident on shots that were formerly outside my confidence range. 
Logged

Offline scottm2012

  • PPHA Members
  • Junior Forum Member
  • **
  • Posts: 174
Re: Need advice on my light
« Reply #7 on: November 24, 2012, 02:45:17 PM »
Nice, I got one coming shortly.  I've been salivating for it to get here.
Logged
Scott Morgan
District 3
TC Venture 308, Savage 340C 222, Dan Thompson and Bees O'Brien Calls 

"I am not your subject. I am the man who keeps you free. I am not your servant. I am the person whom you serve. I am not your peasant. I am the flesh and blood of America."

Joshua Boston

Offline Bees OBrien

  • Seasoned Forum Member
  • ****
  • Posts: 321
Re: Need advice on my light
« Reply #8 on: November 26, 2012, 12:56:09 PM »
i also run mine at the 3 oclock or 9 oclock position depending on which gun i have
Logged

Offline prdtrkilr223

  • Junior Forum Member
  • **
  • Posts: 65
  • There aint no such thing as too dead...
Re: Need advice on my light
« Reply #9 on: December 30, 2012, 10:15:55 PM »
Just buy the neopreme halo shield for the kill light. You can change the angle of the light beam by shifting the halo shield. Alot cheaper than buying another light.
Logged
Pages: [1]   Go Up
« previous next »