« previous next »
Pages: [1]   Go Down

Author Topic: Fleshing board  (Read 8325 times)

Offline Brushwolf

  • PPHA officers.
  • PPHA Forum GURU
  • *****
  • Posts: 889
Fleshing board
« on: September 07, 2012, 09:07:03 PM »
Want to make a fleshing board for coon and grey fox but I need to know what size to make it. I need to know a thickness, length and the width. Any help would be great.
Logged

Offline Hern

  • PPHA Members
  • PPHA Forum GURU
  • *****
  • Posts: 1,977
Re: Fleshing board
« Reply #1 on: September 10, 2012, 08:02:27 AM »
I use an eight inch beam.

Everyone has their own style.
check this link out...
http://jayme220.proboards.com/index.cgi?board=archive6&action=display&thread=185
« Last Edit: September 10, 2012, 08:03:09 AM by Hern »
Logged

Offline Leglifter

  • PPHA Forum GURU
  • *****
  • Posts: 3,652
Re: Fleshing board
« Reply #2 on: September 10, 2012, 03:13:19 PM »
`cool link hern!!

Brushwolf, did you mean wooden stretchers?, not beams?
Logged

Offline Brushwolf

  • PPHA officers.
  • PPHA Forum GURU
  • *****
  • Posts: 889
Re: Fleshing board
« Reply #3 on: September 10, 2012, 07:39:01 PM »
No. I meant fleshing beams. Herns reply gave me some good ideas. looks like there is no standard size at all. Thanks again.
Logged

Offline Hern

  • PPHA Members
  • PPHA Forum GURU
  • *****
  • Posts: 1,977
Re: Fleshing board
« Reply #4 on: September 11, 2012, 08:17:45 AM »
Bw...
I fleshed with different boards and push down or pull down...
Last year I mounted a new beam straight out and like this method because I don't have to bend my back.
It's posted below on the page, but here's the link...
http://www.ppha.us/smf/index.php?topic=6204.0
Logged

Offline jeremybrua

  • Seasoned Forum Member
  • ****
  • Posts: 424
  • i can can do it because i dont know that i cant.
Re: Fleshing board
« Reply #5 on: September 11, 2012, 07:04:51 PM »
i paterned mine with  a #4 wire stretcher.  i just bent it in till the sides lined up with the edge of the 2x8.  i left it 1.5" thick and left a 1.5" flat on the tip.  i  rounded the top so it fit the knife.
Logged
Pages: [1]   Go Up
« previous next »