Author Topic: Paint project 870  (Read 16929 times)

Offline archerobx

  • PPHA Forum GURU
  • *****
  • Posts: 516
Paint project 870
« on: July 02, 2006, 09:10:01 AM »

I had used camo tape years before but it started to peel and fade. To my delight only slight surface rust where the tape pulled away.

Offline archerobx

  • PPHA Forum GURU
  • *****
  • Posts: 516
Paint project 870
« Reply #1 on: July 02, 2006, 09:11:57 AM »
I removed the tape and degreased the gun using Simply Green. The stock was gooey from the tape and the stain comming off so I had to use paint thinner. Used 220 paper to prep all metal and wood, this also removed any rust. Took tape and taped over the checkering in stock, just to see how it would come out

Offline archerobx

  • PPHA Forum GURU
  • *****
  • Posts: 516
Paint project 870
« Reply #2 on: July 14, 2006, 03:45:26 PM »
update photos soon.

Offline archerobx

  • PPHA Forum GURU
  • *****
  • Posts: 516
Paint project 870
« Reply #3 on: October 30, 2006, 09:22:28 PM »
[/img]

got half done.
Barrel and slide= OD
Stock and choke= brown

Offline aubie515

  • Newbie
  • *
  • Posts: 1
Paint project 870
« Reply #4 on: December 21, 2006, 09:48:39 PM »
The pictures are not working.  Have you heard of or considered using Norrell's Moly Resin.  It is a very durable finish.  I finished my 870 Wingmaster and Makarov pistol.  The moly is self lubricating as well.

Offline archerobx

  • PPHA Forum GURU
  • *****
  • Posts: 516
Paint project 870
« Reply #5 on: December 22, 2006, 07:46:51 PM »
I deleted the pics last month. Never heard of the stuff. Have to look into it, thanks